Star Craft Magic Adhesive BUNDLES
Star Craft Magic Adhesive BUNDLES
Star Craft Magic Adhesive BUNDLES
Star Craft Magic Adhesive BUNDLES

Star Craft Magic Adhesive BUNDLES

Regular price
$25.00
Sale price
$25.00
Size
Color
MYSTIQUE BUNDLE
DECEIT BUNDLE
HOLOGRAPHIC BUNDLE
ILLUSION BUNDLE
ALL ROSE GOLD BUNDLE
ALL FLUORESCENT BUNDLE
ALL SILVER BUNDLE

All Colors Pack  (11CT)

  1. MYSTIQUE
  2. ILLUSION
  3. HOLOGRAPHIC
  4. DECEIT  

YOU WILL RECEIVE

  • 1 OF EACH COLOR
  1. SKY BLUE
  2. SILVER
  3. ROYAL BLUE
  4. ROSE GOLD
  5. RED
  6. ORANGE
  7. GUN METAL
  8. GOLD
  9. FLUORESCENT PINK
  10. FLUORESCENT ORANGE
  11. FLUORESCENT GREEN

_____________________________

THESE BUNDLES BELOW ONLY FOUND AT

KRAFTYVILLE.COM & ESTY SHOP KRAFTYVILLECO

ALL COLOR BUNDLE  (4CT) 

  1. ROSE GOLD
  2. SILVER

YOU WILL RECEIVE BELOW

  1. 1 SHEET OF  Deceit 
  2. 1 SHEET OF HOAX HOLOGRAPH
  3. 1 SHEET OF ILLUSION 
  4. 1 SHEET OF MYSTIQUE

________________________________________

ALL FLUORESCENT BUNDLE ( 12CT) 

(GREEN,ORANGE,PINK)

  1. 1 SHEET OF EACH COLOR IN  Deceit 
  2. 1 SHEET OF EACH COLOR IN HOAX HOLOGRAPH
  3. 1 SHEET OF EACH COLOR IN ILLUSION 
  4. 1 SHEET OF EACH COLOR IN  MYSTIQUE

 

IF YOU LIKE OTHER ALL COLOR BUNDLE 

PLEASE INBOX KRAFTYVILLE 

 

Fluorescent colors are not recommended for outdoor use as the Sun's UV rays fade it quickly.

StarCraft Magic Permanent Adhesive Decorative PVC Vinyl Film

  • Durability: 3-5 Years Outdoors (Fluorescent Colors life expectancy is 6 months or less outdoors)
  • Adhesive: Clear Acrylic Permanent Pressure Senstive
  • Thickness: 3mil (76 micron)
  • Cut Settings:  Generally this film can be cut on the same settings as other standard adhesive vinyl film.  We do recommend small test cuts and to adjust pressure accordingly and as required.  

Note: Life expectancy can vary depending on harshness of UV exposure.

Storage Limitations:  

Due to the stiffness of this film, the sheets will not likely lay entirely flat, they will probably curl up or "hump" when in a stack.  DO NOT attempt to roll them the opposite direction and unroll them to get them to lay flat.  This can damage the film and also cause it to "tunnel" which is when the film lifts from the release liner and sort of bubbles up.  This can be corrected by simply lifting the film gently from the release liner and gently using a squeegee or other flat edge to lay the film back town prior to cutting.  

Cut & Application Limitations:

Due to stiffness of the film, smaller intricate cuts may be difficult to weed and work with, as well as have a lower tolerance for lifting from the surface after applied.  We do not recommend sharp corners or edges as these may perpetuate peeling from the surface, especially if handled.  Likewise, due to the stiffness of the film it is not recommended for textured surfaces.  The film will work best if applied to smooth, shiney, clean, and wax-free surface.

Tunneling:

Due to the stiffness of the film, when unrolled "tunneling" may occur which is when the film lifts from the release liner and bubbles or "tunnels" form.  This can be corrected by simply lifting the film gently from the release liner and gently using a squeegee or other flat edge to lay the film back town prior to cutting.